276 SERIES, HYDRAULIC PUSH-PULL COUPLING (CARBON STEEL)ISO-7241-A (1/2" BODY ONLY), POPPET VALVE WITH HOLE, WITH PRESSURE ELEMINATOR

Art. No. Size BodySize Ls Li B Hs T
L HFSMC27612-M181.5-12L 08 1/2" 73 11 12 S27 M18X1.5
HFSMC27612-M221.5-15L 08 1/2" 74 12 15 S27 M22X1.5
S HFSMC27612-M181.5-12S 08 1/2" 74 12 10 S27 M18X1.5
HFSMC27612-M201.5-15S 08 1/2" 74 12 12 S27 M20X1.5
HFSFC27612-1/2" 08 1/2" 70 12 10 S27 1/2"BSPP(NPT)
Art. No. Size BodySize Lp Li B Hp T
L HFSMP27612-M181.5-12L 08 1/2" 58 11 12 S27 M18X1.5
HFSMP27612-M221.5-15L 08 1/2" 59 12 15 S27 M22X1.5
S HFSMP27612-M181.5-12S 08 1/2" 59 12 10 S27 M18X1.5
HFSMP27612-M201.5-15S 08 1/2" 59 12 12 S27 M20X1.5
HFSFP27612-1/2" 08 1/2" 44 12 10 S27 1/2"BSPP(NPT)

APPLICATIONS:

This series couplings are normally used on AGRICULTURAL
implements and applications, the possible panel mounting
allows to easily connect and disconnect plug and coupler with
pull or push only. This couplers are available with both poppet
and ball valve, the standard thread are BSP, NPTF and
metric male 24oaccording to ISO8434-1. Connection under
pressure both male and female side allowed. Max residual
pressure:250 bar.

PERFORMANCE

INTERCHANGE

DNP PKK3 SERIES,SAFEWAY S70 SERIES,
HOLMBURY IAPC SERIES  

TEMPERATURE RANGE

-20oC+120oC/-4oF+212oF
With standard seals: Buna-N(Nitrile)
On request seals: Viton, Neoprene, EPDM or other seals.

BODY SIZE: 1/2"

MAX. WORKING PRESSURE

M18X1.5 :250BAR
M20X1.5 :250BAR
M22X1.5 :250BAR
1/2" :250BAR

MATERIAL

Coupler Body :STEEL, TRIVALENT PLATED
Valve :STEEL, POPPET TYPE
Springs :C98
Locking O-Ring :C98
Balls :GCr15
Seals :Buna-N(Nitrile)
Back-Up Ring :PTFE
Surface treatment :1) Zinc plating and Cr 3+ Passivation
                                   2)Zinc Nickel plating1200 hours with no
                                      red rust in salt spray tests

ATTENTION:

Connection under pressure both male and female side allowed.
Max residual pressure:250 bar. Only plug and socket with the
same thread fit together.

Copyright 2017 NINGBO E.H HYDRAULIC CO.,LTD. All rights reserved.