241 SERIES, MHIGH PRESSURE SCREW-TO-CONNECT COUPLING, AISI 316
CONNECT UNDER PRESSURE

 
   
Art. No. Body Size Lp Hp T
HFSSFC24114-1/4" 1/4" 51 22 1/4"NPTF
 
   
Art. No. Body Size Ls Hs cH T
HFSFP20038-3/8" 1/4" 70 22 25 1/4"NPTF
 

APPLICATIONS:


This serie is general purpose couplings that connect under
pressure for high pressure applications. The 1/4" stainless
steel coupling connects together with a threaded brass
sleeve. Polyurethane seals resist extrusion and abrasion.
Mainly used in off-shore equipment and hydraulic lines in
corrosive environments.
Rated pressure up to 10,000psi and 17,000psi intermittent
pressure,small diameter mating seal keeps separate forces
to a minimum,allowing easier threaded connection and
disconnection at pressures up to 5,000psi.
self-locking threads guard against accidental disconnection
Visual connection indicator--when fully coupled, sleeve edge is
flush with the end of the male thread
standard end configuration is female pipe thread

Body sizes: 1/4"

dust caps and plugs available
 

INTERCHANGE

PARKER 1141 SERIES,SNAP-TITE H SERIES

TEMPERATURE RANGE

-20oC+200oC/-4oF+392oF
With standard seals: polyurethane seal
On request seals: polyurethane or other seals.

MAX. WORKING PRESSURE


1/4" body :700Bar(10150PSI)

Specifications
Specifications
Body Size 1/4"
Rated Pressure(PSI) 10,000
Rated Connect-Under-Pressure Capability(PSI) 5,000
Rated Flow(GPM) 3
Temperature Range(Polyurethane seals) -22oC to +230oF
Vacuum Test 20 in/Hg
Torque to connect at1000 PSI
47 in/lbs
 

MATERIAL

Coupler Body :AISI 316 STAINLESS STEEL
Plug Body :AISI 316 STAINLESS STEEL,BRASS
Valve :AISI 316 STAINLESS STEEL
Springs :AISI 302
Seals :Polyurethane Seal
Back-UP Ring :PTFE

ATTENTION:

Only plug and socket with the same thread fit together.
Plastic dust caps and plugs available.

 

Copyright 2017 NINGBO E.H HYDRAULIC CO.,LTD. All rights reserved.